Romi EL Series

Our all-electric machine is the upgrade of the EN range, total overlap of movements, even lower energy consumption with the highest precision, repeatability and short cycles, our technical machine for all your engineering applications. Clamping tonnage from 75 to 300T.

 

Main Advantages:

  • Up to 60% reduction of energy consumption.
  • Highly energy efficient with the use of servomotors.
  • Ease of operation.
  • Mould environment free from contamination – Clean Room.
  • Centesimal accuracy of all movements through optical encoder system servomotors and use of linear guides.
  • Less weight variation of injected parts.
  • Up to 25% shorter cycle time.
  • Injected mass repeatability around +/- 0.075%.
  • Lower noise level (close to 60 decibels).
  • Up to 80% less generation of ambient heat.
  • Specifications in accordance with EUROMAP standards.
  • Technical safety requirements in accordance with CE standards.
  • Reinforced mould platens, ample distance between tie bars and mould fixing "T" slots.
  • Production monitoring.
  • Total overlap of movements.
  • High plasticizing capacity.
  • Closed loop control.

 

Control Panel

A new generation of technology that significantly reduces the programming time and increases the range of possible controls to be applied in the process.

  • 15'' touch-screen display.
  • USB port for data transfer and storage.
  • Remote connectivity via Ethernet 10/100 (Wi-Fi upgradable)
  • Field bus Ethernet Power Link.
  • Connectivity via the Internet, VNC Server, Web server, FTP server and server PVI.

Main Technical Features

Mould clamping force75
Mould height (maximum x minimum) (mm)420 x 130
Platen size (horizontal x vertical) (mm)600 x 600
Space between tie bars (mm)420 x 420
Maximum daylight opening (mm)780
EUROMAP170
Screw diameter (mm)25 / 30 / 35
Screw ratio (L/D)24 / 20 / 17
Maximum injection volume (cm3))54 / 78 / 106
Maximum injection weight (PS) (g)50 / 75 / 100
Maximum injection pressure (1) (bar)2800 / 2200 / 1620
Mould clamping force100
Mould height (maximum x minimum) (mm)460 x 150
Platen size (horizontal x vertical) (mm)640 x 640
Space between tie bars (mm)410 x 410
Maximum daylight opening (mm)870
EUROMAP366
Screw diameter (mm)30 / 35 / 40 / 45
Screw ratio (L/D)26 / 22 / 20 / 17
Maximum injection volume (cm3))113 / 153 / 201 / 254
Maximum injection weight (PS) (g)106 / 144 / 189 / 239
Maximum injection pressure (1) (bar)3200 / 2350 / 1850 / 1450
Mould clamping force150
Mould height (maximum x minimum) (mm)520 x 160
Platen size (horizontal x vertical) (mm)700 x 700
Space between tie bars (mm)460 x 460
Maximum daylight opening (mm)980
EUROMAP485
Screw diameter (mm)35 / 40 / 45 / 50
Screw ratio (L/D)25 / 22 / 20 / 18
Maximum injection volume (cm3)173 / 226 / 286 / 353
Maximum injection weight (PS) (g)162 / 212 / 269 / 332
Maximum injection pressure (1) (bar)2350 / 2100 / 1700 / 1400
Mould clamping force220
Mould height (maximum x minimum) (mm)630 x 200
Platen size (horizontal x vertical) (mm)850 x 850
Space between tie bars (mm)560 x 560
Maximum daylight opening (mm)1190
EUROMAP873
Screw diameter (mm)45 / 50 / 55 / 60
Screw ratio (L/D)25 / 22 / 20 / 18
Maximum injection volume (cm3))350 / 432 / 522 / 622
Maximum injection weight (PS) (g)329 / 406 / 491 / 585
Maximum injection pressure (1) (bar)2100 / 2000 / 1700 / 1400
Mould clamping force300
Mould height (maximum x minimum) (mm)730 x 200
Platen size (horizontal x vertical) (mm)1040 x 1040
Space between tie bars (mm)730 x 730
Maximum daylight opening (mm)1380
EUROMAP1330
Screw diameter (mm)50 / 55 / 60 / 65
Screw ratio (L/D)24 / 22 / 20 / 18.5
Maximum injection volume (cm3))550 / 665 / 791 / 929
Maximum injection weight (PS) (g)520 / 625 / 745 / 875
Maximum injection pressure (1) (bar)2420 / 2000 / 1680 / 1430